RDM-PRO is a multi-level Remote Device Management system for large-scale installations of high-power COB LEDs and LED modules. It was developed primarily to solve the practical problems of RGBW and other full-color fixtures: bin-to-bin variation, mixed production lots, module replacement, and long-term color drift.
ANSI E1.20 RDM already defines far more functions than most manufacturers implement. RDM-PRO Software uses that unused headroom. It extends the number of settings and device parameters that can be read and written over the same DMX/RDM link, while remaining compatible with standard RDM controllers.
The control system and controller components support both centralized and decentralized topologies. Typical installation issues—addressing, discovery, PWM and load setup, cable and voltage constraints, service data, and field diagnostics—can be handled from the control layer instead of at each luminaire.
Main feature. Automatic color balancing compensates for physical differences between color LEDs and modules. It can be applied after installation, after a replacement, or when different bins are mixed in one project.
The system can also generate commissioning protocols: a record of the installed system for handover and final approval, plus a baseline for tracking brightness change over the life of the installation.
